<%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%> TS4511 Dana 50, Dana 60 Ball Joint Press Set
TS4511 7 Piece Ball Joint Press Set for Dana Model 50 and 60 Axles Applications: The safest and most efficient way to replace the Ball Joints on your Ford or Dodge heavy-duty 3/4 ton or 1 ton 4x4 truck. Change your Ball Joints the easy and safe way! The six, precision made, USA made press adapters are CNC machined from solid, domestic, high strength steel specifically to service the Ball Joints on your truck. This Tool Set includes one each:
QT1065M C-Frame Press
QT1069 Adapter (Used when installing the Lower Ball Joint Nut)
QT1140 Lower Ball Joint Receiver
QT1141 Upper Ball Joint Receiver
QT1142 Upper Ball Joint Installer
QT1147 Press Stub
QT1148 Press Sleeve (Used to install the Lower Ball Joint)
Adapters are machined to fit the dimensions of all stock, original equipment Ball Joints and any aftermarket Ball Joints made to the same or slightly oversize external dimensions as original parts. Adapters are Made in U.S.A. C-Frame Press imported from China.

See Applications, Shopping Cart & Related Main Page Links Further Down This Page
Use Your Browser Back Arrow to Return to Previous Page
Dan the Gear Man® Tech Note:
Before removing your old ball joints, you MUST clean out dirt and crud from the area between the ball joint and edge of the steering knuckle counterbore before placing the Ball Joint Receiver in position. The Receiver must be able to seat against the steering knuckle.
Failure to remove any packed in material will result in major tool damage!
Dan the Gear Man® Tech Note:
Using any type of press can be dangerous due to the forces applied to both the tools and parts. Always wear eye protection. Most workplace safety has to do with having some mechanical experience and plain common sense. If you do not know how to safely work on your vehicle, have the work performed by a professional automotive technician!

<
TS4511 7 Piece Ball Joint Press Set
TS5003 6 Piece Ball Joint Adapter Tool Set only (no Press)
 

TS4511 Fits All These Applications
(plus matching Ball Joint Kit Numbers from the quad4x4.com website):

Dodge:
1994-1997 Ram 2500 V8 gas w/8,800 GVWR or higher rating.
1998-1999 All Ram 2500 with gas V8 engine
1994-1999 Ram 2500 all with V10 or Cummins Diesel engine
1994-1999 All Ram 3500 trucks
2000-up Dodge Ram 2500 and Ram 3500 4x4 trucks
2000-2002 Dodge Ram 3500 4x2 cab and chassis trucks with solid beam front axles


Ford:
1980-1997 F-250 partial (Model 50 4600# IFS axle)
1980-1985 F-350 All (Model 50 4600# IFS axle)
1992-1997 F-350 ALL (Model 60 Axle)
1999-2004 F-250, F-350 Model 50 or 60 axle
1999-2004 F-450 and F-550 Model 60 Axle
2000-2005 Excursion Model 50 Axle
2005-current F-250, F350, Super 60 Axle