Our ten most popular tools for servicing your
4x4 truck or SUV. Each and every tool is
specifically designed to help you quickly, easily, and
accurately perform difficult or tricky service procedures on
your favorite rig.
Our tools are made to work on YOUR 4x4
vehicle. Our tools will save you TIME. Our tools will
save you $$$. Our tools will WORK!
Axle Shaft & Knuckle Seal Installer for FORD
Super Duty easily
installs those fragile and expensive inboard wheel seals on your
outer axle shafts and then seats the axle shaft and seal
assembly to the proper depth in the steering knuckle. This is a heavy
duty, CNC machined tool designed to work on all 4x4 1999-2004 Super Duty F250, F350, F450, and F550 front
axles. Works on either the Dana 50 or Dana 60 front axle. One piece design for ease of use.
Replaces 2 piece Ford Rotunda Tool 205-199 & 205-429.
Shipping Weight: 13 lbs.
Made in U.S.A.
T1515 Axle Shaft and Knuckle Seal Installer for Ford
Super Duty
DOWNLOAD!
from
4x4repairmanuals.com NEW!
Tech Service Bulletin TSB4610 1999-2004 4x4 Ford Super
Duty Front Axle Shaft Service
for only
$4.49 Includesdetailed
axle shaft and knuckle seal service procedures and torque specifications.
Check out our other download and print titles too!
#2
TS4620 Axle Seal Kit
Please Note:
The TS4620 only works with original equipment type seals as
supplied by Dodge or Dana-Spicer. For a complete kit
including seals and CAD gasket, go to quad4x4.comhomepage
and click on the correct front axle page link for your year
Dodge.
Inner Axle Seal Kits for 1988-1993
DODGE W150, W250, and 1994-1998˝ 1500-3500
4x4 Trucks with Central Axle Disconnect (CAD).
Makes seal installation easy and almost fool-proof.
Complete kit Include 2 seal installers, 150,000 psi
tensile strength alloy steel threaded rod with Grade 8 hardware,
and rod guide.
Our special seal installers support these difficult to install
seals in 3 locations and are machined out of solid steel.
Made in U.S.A.
TS4620 Inner Axle Seal Kit
for Dodge
$119.95
DOWNLOAD!
from
4x4repairmanuals.com NEW!
Tech Service Bulletin TSB4620 Inner Axle Seal Replacement
for only
$4.99
8 pages, 31 color photos, 793 KB, pdf format.
1979-1993 MODELS
#3
T2001 NV4500HD
Mainshaft Nut Wrench
Get the Best NV4500 Service
Manual in the world: 4x4repairmanuals.com
NV4500HD Mainshaft Nut Wrench for
1994-2005 Dodge 2500 and 3500 trucks equipped with the New
Venture NV4500HD 5 speed
transmissions. This wrench is a
necessity to remove or install the mainshaft nut. Required for
all in-vehicle and bench repairs that involve mainshaft service
including mainshaft fifth gear replacement. 1/2" Drive wrench.
Fits both 4x2 and 4x4 transmissions. NOTE: ALL 1994-2005 5 speed
Dodge trucks with Cummins Diesel or V-10 have NV4500HD
transmissions. Made in U.S.A.
T2001 Mainshaft Nut
Wrench for NV4500HD Transmissions $49
Rear Crankshaft Seal Installer Set for Cummins Diesel Engines.
Easily and accurately install a new crankshaft rear main oil
seal on your Dodge Diesel with the 5.9l Cummins engine or other
application with a 4BT or 6BT Cummins Diesel engine. Our
precision machined aluminum tool installs your new crank seal to
the correct depth every time without damaging the crank or seal.
With the TS6000 Kit, your crank seal can be replaced without the
expense and hassle of removing the seal adapter. This set can
also be used to press a wear sleeve over the crankshaft. Kit
includes T3000 Installer, Driver Handle, Guide/Press Studs,
Drill Bit, & Hardware Package. Replaces Cummins tool 3824078.
Made in U.S.A.
TS6000 Rear Seal Installer
Kit for Cummins BT engines $159.95
Why
Wait?DOWNLOAD SERVICE PROCEDURES NOW! Tech Service Bulletin
TSB6000 Cummins Rear Crankshaft Seal
Replacement for only
$1.99! Includesdetailed
seal replacement service procedures, wrench sizes and
torque specs! Two pages, 4 line drawings. 154KB
download
#5
Wheel Seal Installer
Wheel Seal Installers are designed to quickly and easily
install specific wheel seals. Totally functional, high
quality tool machined from solid aluminum. Made to
install seal square and to the proper depth without distorting
the seal shell. Our seal installers have a pilot that
keeps the seal centered and are face grooved to provide
clearance for the outer seal lip and/or raised shell. Once
you use one of these babies you won't ever want to install a
seal without one! Drilled to accept any driver handle with
a 5/8" tip. Order Driver Handles from our
Seal Installers Page.
Made in U.S.A.
T1503 Fits many Ford and Dodge rear 3/4 and 1 Ton rear wheel
applications. All those using any of these seals: National
9864S, Timken 9864S, Ford F7UZ-1S175-A, Motorcraft BRS-12,
Spicer 47507, NAPA 28720 and Chicago Rawhide 28720
$29.97
.
#6
Bearing Cup Installer
Kits including, tools, bearings, seals,
instructions and videos are available from quad4x4.com
Bearing Cup Installers are the key to damage free bearing cup
installation. Completely seat those bearing cups without
damage. Eliminates one of the most common causes of
premature bearing failure, namely improper installation with
punches or other makeshift tools. Precision CNC machined solid steel
tool is
drilled to accept any driver handle with a 5/8" tip. Order Driver Handles from our
Bearing Cup Installer
Page. Made in U.S.A.
T1801 is our best
selling cup installer. No wonder, as it is used to install
the popular
JLM104910 and LM104949 bearing cups used in Chevy, Dodge, Ford,
GMC, and Jeep full sizes SUV's, 1/2, 3/4 and 1 ton trucks from
1968 all the way to 2002.
T1801 Front 4x4 Inner Wheel Bearing Applications Chevy/GMC: 1977˝-1991 full
size Blazer, Jimmy, Suburban and 1977˝-1987
K20, K25, and K2500 3/4 ton Dodge: 1980-1993 W150, W250 with gas engine Ford: F250 1976-1996 F-250 with Model 44 axle and
internal spline hub Jeep: All Full size Cherokee, Wagoneer, J10, and J20 after
1977˝
T1801 Rear 3/4 and 1 Ton Outer Bearing Applications Dodge: All 3/4 and 1 ton trucks 1977-2002 Ford: F-250, F-350 1968-1997 (except Dana 80)
T1801 Rear 3/4 Ton Inner Bearing Applications
Dodge: 1977-1993 Light duty 3/4 ton with Dana 60 & gasoline
engine
Ford: F-250 1968-1984 Most with Dana 60 Rear
T1801 Bearing Cup
Installer Tool for JLM104910 and LM104911
Inner
Pinion Bearing Installer for Dana-Spicer Model 60 and 61 axles,
Dodge 8.25" rear axle, Ford 8.8" rear axle, and GM 10 bolt
(front & rear) axles. A real time saver!
Press or drive your expensive pinion bearing on quickly and
easily. Dana 60 and 61 Axles are found on 1950's to current
3/4 and 1 Ton trucks from Chevy, Dodge, Ford, GMC, IHC, and Jeep
in both front and rear applications. HM803146 bearing. Dodge 8.25" Rear Axle: Dakota and 1/2 Ton 1980-1999,
M802048 bearing. Ford 8.8" Rear Axle F150, E250 1983-2003,
M802048 bearing. GM 8-1/2" 10 bolt Axles with M802048 inner bearing from
1976 to 2006 for both front and rear applications. M802048
bearing. Made in U.S.A.
T1043 Pinion Bearing
Installer $29.97
#8
Differential Press Adapter
Differential Press Adapter for Dana 60/70/80, GM 14 Bolt and
Ford 10.25/10.5" axles. An essential tool whenever
you press your diff bearings off with a center forcing screw
puller. Also used to support the differential when
driving/pressing bearings on. Made
in U.S.A.
Use with a puller when pulling bearings off
Supports
differential when pressing bearings on
T1088 Differential Press
Plate $24.97
#9
TS4643
Super Duty Inner
Axle Seal Installer Set
DOWNLOAD!
from
4x4repairmanuals.com NEW!
Tech Service Bulletin TSB4643 1999-2004 4x4 Ford Super
Duty Front Inner Axle Seal Service
for only
$4.49 Includesdetailed
axle shaft and knuckle seal service procedures and torque specifications.
Check out our other download and print titles too!
Inner Axle Seal Set
fits all 1999-2004 Super Duty front drive axles. Quickly
and easily press in new inner axle seals without damage!
Installation tool cups the seal so force is only applied on the
outer shell. Kit includes seal installer, thrust plate,
and press screw assembly. Made
in U.S.A.
TS4643 Axle
Shaft Seal Kit for 1999-2004 F-250 and F350 equipped with the
Dana Model 50 front axle. (Most
2000-2004 F350 Dual Rear Wheel Trucks have a Dana
60 axle)
$125.97
TS4643 only $116.97When You Buy
Online! Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
TS4644 Axle Shaft Seal Kit
for 1999-2004 F450, F550, and 2000-2004 F350 Dual Rear
Wheel Trucks (Dana Model 60 Front Axle)
$129.97
TS4644 only $119.97When You Buy
Online! Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1130
Optional Dana 60 Thrust Plate. If you already have
our QK4643 Set, order this Thrust Plate and you can use
your QK4643 Set to install the Inner Axle Seals on Super
Duty models with the Dana 60 axle.
$32.97
T1130 only $29.97 When You Buy
Online!
Thank You for Shopping Online!
#10
T1123
Axle Shaft Puller
T1123 Ready to Go!
Front Axle Shaft Puller for 1994-2004 Ford Super Duty attaches to any 5/8" fine
thread* Slide Hammer. Will quickly and easily remove
your front axle shafts. This is the only tool on the
market that allows you to remove the axle shaft without beating
on the big knuckle seal pressed on the outer axle shaft.
(*SAE National Fine, 18 threads per inch.)
$84.97
Made in U.S.A.
T1123 Super Duty Front
Axle Shaft Puller only $79.97 When You Buy
Online! Additional
online shopping cart discounts available for quantity purchases of 3
or 5 pieces!
Use with a puller when pulling bearings off
