Bearing Cup Installers are the key to damage free bearing
cup installation. Completely seat those bearing cups without
damage. Eliminates one of the most common causes of
premature bearing failure, namely improper installation with
punches or other makeshift tools. Precision machined solid steel
tool is drilled to accept any driver handle with a 5/8" tip.
We recommend an 8" handle for most applications and a 14" handle
for deep set inner pinion, rear hub and transmission bearing
cups. Made in U.S.A.
To see the rest of our 4x4 special tools, go to
the main QUAD 4x4
website
SAVE 10% When you order online or Save up to 30% on your online volume
purchase!
Driver Handles
with 5/8" Tip
Driver Handles
from left: T1100, T1101, (1")
T1116, T1119 (1¼")
Using T1101 14" Driver Handle and T1802 Cup Installer to install
the countershaft front bearing cup in a New Venture NV4500 5
speed transmission case.
Installer Driver Handles with knurled hand grip are used
with a variety of 4x4 Tech Seal and Bearing Installers.
Use 8" for general purpose use, or 14" for deep seated bearing
cups such as inner pinion and transmission case. Available
in 1" diameter for general purpose use and 1¼" diameter for
professional use. Made in U.S.A.
T1100 1" x8"
Driver Handle $19.97
T1100
only $17.97 When You Buy
Online!
Additional
online shopping cart discounts available for
quantity purchases of 3 pieces!
T1101 1"x 14" Driver Handle $24.97
T1101
only $22.47 When You Buy
Online!
Additional
online shopping cart discounts available for
quantity purchases of 3 pieces!
T1116 1¼" x 8"
Driver Handle$27.97
T1116
only $25.17 When You Buy
Online!
Additional
online shopping cart discounts available for
quantity purchases of 3 pieces!
T1119 1¼" x 14"
Driver Handle $34.97
T1119
only $31.47 When You Buy
Online!
Additional
online shopping cart discounts available for
quantity purchases of 3 pieces!
Bearing Cup Installer
Applications
Bearing Cup Installers Tapered body with rounded or chamfered edges. Will not
damage your expensive bearing cups. All numbers have
5/8" center hole to fit our driver handles or other similar
tools.
SAVE 10% When you order online or Save up to 30% on your online volume
purchase!
T1801
Wheel Bearing Cup Installer is used to install the
popular JLM104910 and LM104911 bearing cups used
in Chevy, Dodge, Ford, GMC, and Jeep full sizes SUV's,
1/2, 3/4 and 1 ton trucks from 1968 to current. (Also see
T1823) $22.97
T1801
only $20.67 When You Buy
Online! Additional
online shopping cart discounts available for quantity
purchases of 3 or 5 pieces!
T1801 Front 4x4 Inner Wheel Bearing
Cup Applications Chevy/GMC: Full
Size Blazer, Jimmy, Suburban 1977½-1991 Chevy/GMC: K10, K15, K1500 1/2 ton Pickup
1977½-1987 Chevy/GMC:
K20, K25, and K2500 3/4 ton Pickup 1977½-1987 Dodge: W150, W250 with gas engine 1980-1993 Ford: F250 1976-1996 F-250 with Model 44 axle and
internal spline hub Jeep: All Full size Cherokee, Wagoneer, J10, and J20 1977½-1991 Toyota:
Landcruiser, 4 Runner & Pickup 1976-1998
T1801 Rear 3/4 and 1 Ton Outer Wheel Bearing Applications
Chevy/GMC: 1973-2007 3/4 & 1 Ton C/K/G Full
Float Rear Axle (Use flat side) Dodge: All 3/4 and 1 ton trucks 1977-current Ford: F-250, F-350 1968-current (except Dana 80)
T1801 Rear 3/4 Ton Inner Wheel Bearing Applications Dodge: 1977-1993 Light duty 3/4 ton with Dana 60 & gasoline
engine Ford: F-250 1968-1984 Most with Dana 60 Rear
Toyota: Landcruiser with full float rear axle
1975-1997
T1802 Bearing Cup Installer
installs LM102910 and LM501310 front wheel bearing cups
on many lighter 4x4's. Also installs the NV4500 5 speed front
counter shaft cup.
$19.97
T1802
only $17.97
When You Buy
Online!
Additional
online shopping cart discounts available for quantity
purchases of 3 or 5 pieces!
T1802
Front Inner Wheel Bearing Applications IHC: Scout 1963-1980 Jeep: CJ5/6/7/8 1962-1986, All Jeepster
Commando and Scrambler Jeep: J Series Light Duty 1963-1972
T1802 Front
Outer Wheel Bearing Applications Chevy/GMC: Full Size Blazer/ Jimmy & Suburban
1967-1991 Chevy/GMC: 1/2 Ton K10/15/K1500/V1500 1957-1987 Chevy/GMC: 3/4 Ton K20/25/2500/V2500 1959-1987 Ford: Bronco: 1966-1996 except 1987-1991 Axle Tag
#'s 610267, 610309, 610311 Ford: F100/150: 1959-1996 except 1987-1991 Axle
Tag #'s 610267, 610309, 610311 Ford: F250 Model 44 Axle: 1959-1988 Dodge: W100 1969-1974, W150 1980-1993, W250 (Gas)
1980-1993 IHC: Scout 1963-1980 Jeep: CJ5/6/7/8 1962-1986, All Jeepster Commando
and Scrambler Jeep: 1962-1991 J-Seres Full Size Cherokee, Wagoneer,
Pickup, FC150 Toyota: Landcruiser, 4 Runner & Pickup 1976-1998
T1802 Rear Outer Wheel Bearing Applications
Toyota: Landcruiser with full float rear axle
1975-1997
T1802 Transmission Applications
NV4500 5 Speed: Countershaft Front 1992-2007
T1803 Cup Installer for LM603011
races is used on many light duty Ford front inner wheel
bearing cups and early Dodge, GM, IHC, and Jeep 1/2 ton
models.
$21.77
T1803
only $19.59 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases of 3 or 5 pieces!
T1803
Front Inner Wheel Bearing Applications
Chevy/GMC: K5 Blazer/Jimmy, K10/15 1/2 ton Pickup &
Suburban 1958-early 1977
Dodge: W100 1969-1974
Ford: Bronco: 1966-1996 except 1987-1991 Axle Tag
#'s 610267, 610309, 610311 Ford: F100/150: 1959-1996 except 1987-1991 Axle
Tag #'s 610267, 610309, 610311 IHC: 1/2 Ton with 5 bolt wheel and axle models
FA16, 17, 46 Jeep: J-Series Full Size Cherokee, Wagoneer,
1/2 ton Pickup 1974-early 1977
T1804 Cup Installer for installing 382A, 28622, and NP064306 bearing
cups in many 3/4 and 1 ton wheel hubs. $25.97
T1804 only
$23.37 When You Buy
Online!
Additional online shopping cart discounts available for quantity purchases of 3
or 5 pieces!
T1804 Cup Installer Front Inner Wheel Bearing Applications
Chevy/GMC: K30, K35, K3500 1 Ton 1977-1991
<70 Ford: 1973-2004 E350 Van with full float rear (most) Ford: 1999-up F250 & F350 Super Duty (10.5" rear axle)
T1805 Wheel and Pinion
Bearing Cup Installer for
362A inner wheel bearing cup and HM803110 pinion bearing
cup $22.97
T1805
only $20.67 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1805 Cup Installer Front Inner Wheel Bearing Applications
Chevy/GMC: K20, K25, ¾ Ton 1960-1977½ (External 6 bolt hub or drive
flange)
Ford: F250 Heavy Duty Models 1959-Early 1977
(External 6 bolt hub or drive flange) Jeep: 1974-1977 3/4 ton J4800, J20 (External 6
bolt hub or drive flange)
T1805 Cup Installer Rear Inner Wheel Bearing Applications
Jeep: 3/4 ton with Full Float Rear Axle 1970-1973
T1805 Inner Pinion Bearing Cup Applications
Dana 60, 61 Front Axle: 1976-2004 Dana 60, 61 Rear Axle: 1954-up Dana 70U, 70-2URear Axle: Ford 1980-2002,
Dodge 1983-2002
T1806 is
used on heavy duty 3/4 and one ton truck rear axles for
45520 inner wheel bearing
cups and M807010 inner pinion bearing cups.
45220 is also used in NV5600 transmissions.
$29.97
T1806
only $26.97 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1806
Rear Inner Wheel Bearing Applications
Jeep: 1967-1969 M715, M725, M726 1¼ Ton Military Truck
T1806 Rear Axle Inner Pinion Bearing Cup Applications
Chevy/GMC
1 Ton Dual Rear Wheel with Dana 70B and 70HD
1973-1990
Chevy/GMC: Motor Home, GMT455, P-Truck 1990-1999
with Dana 80
Chevy/GMC:
C/K3500 Dual Rear Wheel with GM/AAM 11.5" Rear Axle1997-up
Dodge: W300, W3501957-Early 1984 All with Dana 70 Rear Axle
Dodge:
2500 & 3500 1994-2002 with Dana 80 Rear Axle
Dodge:
2500 & 3500 2003-up with AAM 11.5" Ring Gear Rear
Axle
Ford: Super Duty F350, F450 with Dual Rear Wheel
Dana 80 1988-1998
IHC:
1968-1975 All with Dana 70 Rear
Jeep:
FC170 & J-Series 1 Ton Trucks with Dual Rear Wheels
(Dana 70) 1957-1968
Jeep:
1967-1969 M715, M725, M726 1¼ Ton Military Truck
T1806
Transmission Bearing Cup Applications
New Venture: NV5600 Mainshaft Center, 6 speed used
by Dodge 1999-2005½
T1807
installs 3920 inner wheel bearing cups on Ford F250 and
F350 trucks with Ford 10.25" rear axles. Also
installs 39520 Bearing cups used on medium duty trucks
in both front inner and rear outer wheel bearing
applications. $29.97
T1807
only $26.97 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1807 Rear
Inner Wheel Bearing Applications
Ford: 1965-1998 Ford F250, F350 with 10.25" Ford
Rear Axle Ford: 1988-98 F450 with F53 and F54 Rear Axles
T1808 is for installing JLM506810
outer wheel bearing cups on some 1990's model 1 ton
trucks. $25.97
T1808
only $23.37 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 pieces!
T1808 Rear Outer Wheel Bearing Applications
Chevy/GMC 1997-1999 P-Series with 4 wheel disc
brakes Ford: 1988-98 F450 with F53 and F54 Rear Axles
T1809 is used
to install 453X rear inner wheel bearing cups on
Jeep M715 Series 1-1/4 ton military trucks and front
inner wheel bearing cups on International 1600 4x4 1-1/2
ton trucks. 453X Bearing cups are also used in
outer rear wheel positions on some 1-1/2 ton Trucks
$29.97
T1809
only $26.97 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 pieces!
T1809 Front Inner Wheel bearing Applications
IHC: 1600 4x4
T1809 Rear
Inner Wheel Bearing Applications
Jeep: 1967-1969 M715, M725, M726 1¼ Ton Military Truck
T1810
installs 14276 output shaft bearing cups in Dana 18, 20
and 21 transfer cases $18.97
T1810
only $17.07 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 pieces!
T1810 Transfer
Case Front Output Shaft Front Bearing Applications
Ford: Bronco 1966-1976Dana 20 Transfer Case
Ford: F100 with 3 speed transmission and Dana 20
Transfer Case 1966-1976
Ford: F100 with 4 speed transmission and single
speed Dana 21 Transfer Case
IHC:All Scout with Dana 20 Transfer
Case
Jeep: 1972-1973 All Jeep: 1974-1979 All models with manual
transmissions
T1810 Transfer Case Rear Output Shaft Bearing
Applications
IHC: Scout 1961-1972 with Dana 18 Transfer Case Jeep: All models (except M715 series) 1946-1971
T1811
installs the 15245 rear output shaft rear bearing cup in
Dana 20 and 21 transfer cases. $17.97
T1811
only $16.17 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 pieces!
T1811 Transfer
Case Rear Output Shaft Rear Bearing Applications
Ford: Bronco 1966-1976Dana 20 Transfer Case
Ford: F100 with 3 speed transmission and Dana 20
Transfer Case 1966-1976
Ford: F100 with 4 speed transmission and single
speed Dana 21 Transfer Case
IHC:All Scout with Dana 20 Transfer
Case
Jeep: 1972-1973 All Jeep: 1974-1979 All models with manual
transmissions
T1812
installs HM88510, 25821, 02820 bearing cups in Dana
axles and transfer cases. $19.97
T1812
only $17.97 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1812
Transfer Case Rear Output Shaft Front Bearing
Applications (25821)
Ford: Bronco 1966-1976Dana 20 Transfer Case
Ford: F100 with 3 speed transmission and Dana 20
Transfer Case 1966-1976
Ford: F100 with 4 speed transmission and single
speed Dana 21 Transfer Case
IHC:All Scout with Dana 20 Transfer
Case
Jeep: 1972-1973 All Jeep: 1974-1979 All models with manual
transmissions
T1812 Dana Axle Models 25, 27, 30, 44, 50, 53 (02820)
Chevy/GMC: 1960-1980 Ford: 1959-2004 Dodge: 1957-2001 IHC: 1956-1980
Jeep: 1942 to Present
T1812 Outer Pinion Bearing Cup Applications
Dana Axle: Models 60, 61 and 70 1954-present.
These axle models are found in many heavy 1/2 ton, 3/4
ton, and 1 ton front and rear axles used by Chevy/GMC,
Dodge, Ford, IHC, and Jeep. The Dana 70 was also
used by Dodge and International as a front axle on 1-1/2
ton trucks.
T1813 King Pin Cup Installer
installs 23256 King Pin Bearing Cups on many 1993 and
older heavy duty 4x4 trucks. $18.97
T1813
only $17.07 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1813 Application: Dana 44HD Closed
Knuckle
(12 Bolt Ball Seal) Chevy/GMC: K20/K25 Heavy Duty Model 1967-1969 Dodge: W200 Heavy Duty 1967-1972 Ford: F250 Heavy Duty Model 1969-1975 IHC: 200, 1200 Heavy Duty Model 1967-1975
T1813 Application: Dana 60, 61 Open Knuckle, Lower
Bearing Cup Chevy/GMC: 1ton K/V Series -1977-1991 Dodge: W300 & 350 1975-1989, W250 Diesel 1989-1993 Ford: F150 Super Cab 1978-79, F250HD & F350 1977-1979,
F350 1985-1991
T1814 is for setting 354A cups in
vintage rear wheel hubs. $22.97
T1814
only $20.67 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 pieces!
T1814 Rear Outer Wheel Bearing Applications Dodge: W200 1959-1973 Dodge: W300 1964-1976 Most with Dana 60 Ford: F3 1946-1952
T1815 Pinion Bearing Cup
Installer for HM88610 cups is used on a wide variety
of vehicles from small Jeep CJ's to massive Ford Super
Duty's. $19.97
T1815
only $17.97 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 pieces!
T1815 Front
Outer Pinion Bearing Cup Applications
Chevy/GMC: K2500 & K3500 9.25" Ring Gear IFS Axle1988-2007
T1815 Front Inner Pinion Bearing Applications
AMC: Eagle
Dodge: 1500 1994-2001
Ford: F250 with 4600 lb. Dana Model 50
Twin Traction Beam IFS Axle 1980-1988
Ford: F250 All 1989-1998
Ford: F350 with Dana Model 50 Twin
Traction Beam IFS Axle 1980-1984
Ford: Bronco, F-150 Model 44 IFS Axle 1992.5-1996
Ford: F250, F350 Single Rear Wheel Dana
Model 50 MonobeamAxle 1999-2004
Jeep: All CJ, TJ, WJ, XJ, YJ, ZJ with Model 30 Front
Axles 1972-up
T1815 Rear Outer Pinion Bearing Applications
Chevy/GMC: 1500HD & 2500 with 14 bolt 9.5" Ring Gear
1981-2002
T1816 Inner Pinion
Bearing Cup Installer for HM804810 and HM903210
$25.97
T1816
only $23.37 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 pieces!
T1816
Front Inner Pinion Bearing Cup Applications
Chevy/GMC: K2500 & K3500 9.25" Ring Gear IFS Axle
1988-2007
T1816 Rear Inner Pinion Bearing Applications
Chevy/GMC: 1500HD & 2500 with 14 bolt 9.5" Ring Gear
1981-2002 Chevy/GMC: 2500 & 3500 with 2nd design 14 bolt 10.5"
Ring Gear 1988-2002
T1817 Installs the NP882000
countershaft center bearing cup in New Venture NV5600 6
speed transmissions.
T1817
only When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases!
T1816
Transmission Bearing Applications
New Venture: NV5600 Countershaft Center, 6 speed
used by Dodge 1999-2005½
T1818 Axle and Transfer Case
Bearing Cup Installers are used to install 2720, 31520,
HM89410 cups in many 4x4 applications.
Also see T1830$19.97
T1818
only $17.97 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1818 Transfer
Case Bearing Cup Applications
New Process: NP200, NP201, NP205 Idler Shaft
T1816 Inner Pinion Bearing Applications
Chevy/GMC: HO33 Rear Axle 1953-1956,
1960-1964
Chevy/GMC: HO35, HO35 8-7/8" Rear Axle 1965-1979
Dodge:
Dana-Spicer: All Model 44 1950-1993, Jeep
1956-current Ford: 9" Heavy Duty 1964-1976 Jeep: 1946-1972 All with Dana 25 Front Axle or 1946-1961
Dana 25 Rear Axle
T1816 Rear Outer Pinion Bearing Applications Rockwell: A150 1953-1955 Ford 1/2 and 3/4 Ton
T1819 King Pin Cup Installer
installs the small 11520 King Pin Bearing Cups on many
1975 and older light duty 4x4 trucks and SUV's.
$15.97
T1819
only $14.37 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1819 Application: Dana 25, 27, 30,
and 44 Closed
Knuckle
(8 Bolt Ball Seal) Chevy/GMC: K10/15 and K20/K25 1960-1969 Dodge: W100 & W200 Light Duty 1957-1970 Ford: F100 1959-1966 Ford: F250 Light Duty 1959-1975 IHC: Scout, 100, 200, 1200 Light Duty Models 1953-1971 Jeep: All except M715 Series 1941-1971
T1819 Application: Dana 30 and 44 Open Knuckle Ford: Bronco and F100 1966-1972
T1820 Outer Pinion
Bearing Cup Installer for M88010 cups.
$18.97
T1820
only $17.07 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 pieces!
T1820 Front Outer Pinion Bearing Applications
Chevy/GMC: Full
Size Blazer, Jimmy, Suburban 8.5" 10 Bolt Axle 1977½-1991 Chevy/GMC: K10, K15, K1500 1/2 ton Pickup
8.5" 10 Bolt Axle 1977½-1987 Chevy/GMC:
K20, K25, and K2500 3/4 ton Pickup 8.5" 10 Bolt Axle 1977½-1987 Chevy/GMC: K1500 & K2500 with 8.25" IFS Axle
1988-2003
T1820 Rear Outer Pinion Bearing Applications Chevy/GMC: All with 8½" & 8-5/8" 10 Bolt Rear Axle
1977-2003 Chevy/GMC: All Blazer, K10/15 with 8-7/8" Ring Gear
1964-1981 Dodge: 1/2 ton with 8-7/8" Ring Gear 1966-1974 Dodge: 1/2 ton with 9¼" Ring Gear 1969-2003 Ford: Bronco, F100, F150 with 9" removable carrier axle
1957-1986 Ford: F150, F250 Light Duty, Bronco with 8.8" Rear Axle
1983-2004 Jeep: CJ and Scrambler with AMC 20 1976-1985 Jeep: Full Size Cherokee, Wagoneer, J10 with AMC 20
1980-1985
T1821 Wheel Bearing Cup Installer
for vintage trucks with 18620 cups.
$21.77
T1821
only $19.59 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 pieces!
T1821 Front Axle Outer Wheel Bearing Applications
Dodge: W100 & W200 with Dana 44-3F Axle 1957-1968 IHC: 3/4 Ton 1956-1973 IHC: 1 Ton with FA15, 18, 25, & 45 Axles
1971-1973
T1821 Front Axle Inner Wheel Bearing Applications IHC: 3/4 Ton 1956-1973 IHC: 1 Ton with FA15, 18, 25, & 45 Axles
1971-1973
T1821 Rear Axle Outer Wheel Bearing Applications Chevy/GMC:
3/4 ton 20 series with Dana 60 Full Float 1965-1972 Ford: F2 1946-1952 Jeep: J20 3/4 ton truck 1977-1988
T1822 Inner Pinion
Bearing Cup Installer for NP434567 cup.
$25.97
T1822
only $23.37 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1823Bearing Cup Installer is
specifically machined to fit M802011 and NP728109
bearing cups commonly used in transmission and axle
applications, but it will also work to install JLM104910
and LM104911 cups in all the applications listed for our
T1801 albeit with a loose fit.
The outside diameter of M802011, NP728109, JLM104910,
and LM104911 cups is the same, however the
NP728109 cup inside diameter is smaller and has a
greater taper. $21.77
T1823
only $19.59 When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases
of 3 or 5 pieces!
T1823 Front Axle Inner Pinion Bearing Applications
Chevy/GMC: 1977-1999 ½ ton & ¾ ton with GM 10 Bolt beam & IFS 8.5"
axle
T1823 Rear Axle Inner Pinion Bearing Applications Chevy/GMC: 1973-1999 ¾ & 1 ton with
GM 14 Bolt 10.5" Rear Axle Dodge: Dakota 1986 -up with 8.25 Ring Gear Dodge: 1/2 Ton & Light Duty 3/4 Ton
1980-2003 with 8.25" & 8.375" Rear Axles Ford: Bronco II, Ranger, Explorer 1983-up with
7.5" & 8.8" Rear Axles Ford: Bronco, F150, Light Duty F250 1983-up with
8.8" Rear Axle Jeep: CJ 1976-1985 with AMC 20 Rear Axle Jeep: Full Size Cherokee, Wagoneer, J10 1/2 ton
Truck 1984-1985 w/AMC 20 Jeep: Cherokee, Grand Cherokee 1991-2001 with
Chrysler 8.25" Rear Axle
T1823 Rear Axle
Outer Pinion Bearing Applications Chevy/GMC: ½ ton SUV/Truck with GM 10
Bolt 8.5" rear axle 1977-1997 Ford: F450 with Dana 80 1999-2004 Dodge: 2500, 3500 with Dana 80 (mostly
Diesel & manual transmission) 1994-2002
T1823
Transmission Bearing Cup Applications
New Venture NV4500: Input Shaft 1992-2007
T1830 has a
tighter fit for installing 31520 bearing cups.
Preferred by many professional Dana axle techs over our
T1818 installer. $19.97
T1830
only When You Buy
Online!
Additional
online shopping cartdiscounts available for quantity purchases!
Bearing Cup Installer
Applications by Make and Model
Inner Front Wheel Bearing
Cup Installers for Chevy/GMC
1977½-1991 Full Size 4x4 Blazer/Jimmy, ½
& ¾ Ton Truck Installer: T1801
(JLM104910)
1977½-1991: Full
Size K5 Blazer, K5 Jimmy, Suburban 1977½-1987: K10, K15, K1500 1/2 ton Pickup 1977½-1987: K20, K25, and K2500 3/4 ton Pickup
1958-Early 1977 ½ Ton
4x4
Blazer/Jimmy, K10, K15
Installer: T1803 (LM603011)
1958-early 1977:
K5 Blazer/Jimmy, K10/15 1/2 ton Pickup & Suburban
